![HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 95](http://html.mh-extra.com/html/hp/4200-laserjet-b-w-laser-printer/4200-laserjet-b-w-laser-printer_user-manual_157882095.webp)
7
The status of a print
job is "Unknown" on
the Print Jobs page in
the web interface.
Delete the print job and resend it.
8
I am trying to print a
large print file. Is there
a maximum size of
print job that the
appliance will handle?
The appliance can process print jobs up to a maximum size of 2GB.
9
There are a lot of jobs
spooled on the
appliance. Is there a
limit?
Up to 10,000 jobs can be spooled at a time, which might be further
restricted by the disk space available on the appliance.
10
I am trying to print in
Landscape mode, but
the margins are offset.
If you have not done so,
for that printer.
11
The performance of
the appliance is very
slow when connecting
to the appliance via
Network
Neighborhood or when
opening a printer's
Property Page in
Network
Neighborhood.
Delays connecting to a printer via Network Neighborhood or displaying
the Property page in Network Neighborhood are often caused by an
incorrectly configured DNS entry for the appliance. If DNS is
misconfigured, it can take 1-2 minutes for the appliance to respond to a
request.
The appliance requires entries in both the DNS server's forward and
reverse lookup tables. You can verify the appliance's DNS
configuration from a Windows NT or Windows 2K system command
prompt by running the following commands:
nslookup <applianceName.appliance-DNSdomain>
●
nslookup <appliance-IP-Address>
●
The first command verifies there is a DNS entry for the appliance's
name and the second verifies that there is a DNS entry for the
appliance's IP address. If you get a negative response from either of
these commands, you need to correct your DNS configuration. If you
do not receive a negative response, please
.
12
Jobs are getting stuck
on the appliance for
one of my printers.
The appliance uses LPD to send print jobs to its printers. If the print
server connecting a printer to the network does not support LPD, jobs
for that printer will get stuck on the appliance. You may need to
upgrade the firmware of the offending print server or it may need to be
replaced with a print server that supports LPD.