manualshive.com logo in svg

HP 4200 - LaserJet B/W Laser Printer, User Manual

Share
Download
HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 53

The appliance comes preloaded with numerous HP printer drivers. While these will cover many needs, other drivers
may be required. This section discusses the procedure for adding drivers to the appliance.

Note: After the appliance has been configured and drivers have been associated with printers, the configuration should
be 

backed up

.

Adding a New Printer Driver

To add a driver to the appliance, click 

 on the 

Driver Management page

. The New Printer Driver (Step 1

of 3) page is displayed. This page can also be accessed by clicking 

on the 

Add Printer (Step 3 of 3)

page

.

Note: Before drivers can be initialized, Java Scripting must be enabled (in Internet Explorer, under: Internet
Options-->Security (tab)-->Custom Level (button)-->Scripting-->Scripting of Java Applets (subheading).

New Printer Driver (Step 1 of 3):

New Printer Driver (Step 1 of 3)

Field Name

Description

Driver setup information file

Type the path for the printer driver, or click browse.

Note: An XP, 2K, or NT driver must be added before a 9x driver can be
added.

Supported operating system

Specify the operating system for the driver being added.

Note: The driver's operating system specified must never be above the
operating system of the PC you are working from. For example, if you are
working from an NT system, you can only add NT and 9x drivers. If you
are working from an XP system, you can add XP, 2K, NT, and 9x drivers.

●   

Summary of Contents for 4200 - LaserJet B/W Laser Printer















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands