HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 78 | Manualshive

Page: 78 / 142

background image

Add Printer Wizard and Add Driver Wizard

Message

Explanation / Remedy

Invalid Driver Setup Information File:
<filename> does not contain driver information for
<specified OS name>. Please specify another driver
setup information file (*.inf).

The .inf file specified conflicts with the
user-specified operating system for that file.

Verify that the correct operating system was
specified with the .inf file you are entering.

Invalid Driver Setup Information File:
No driver setup information file selected. Please enter
a driver setup information file (*.inf).

The .inf filename is blank. Complete the filename.

Invalid Driver Setup Information File:
<filename> is not the correct file type. This
application can only install printer drivers using *.inf
files. Please specify another driver setup information
file (*.inf).

The file specified does not have a .inf filename
suffix and is not viewed as a driver setup
information file.

Verify that the specified file is a driver setup
information file with the appropriate .inf filename
extension and retry.

Invalid Driver Setup Information File:
<filename> could not be read or does not contain any
printer drivers. Please specify another driver setup
information file (*.inf).

The .inf file specified might be corrupted or it might
not be a driver setup information file.

Verify that the specified .inf file is a printer setup
information file and retry. If the problem persists,
try a different copy of the desired driver or consider
using a different driver.

Install a Windows NT, 2000, or XP Driver First:
You must install a <printer name> driver for Windows
XP, Windows 2000, or Windows NT 4.0 before you
install a driver for Windows 9x (Windows 95, 98, and
Me).

The appliance has been unable to detect a Windows
XP, 2K, or NT printer driver to correspond with this
9X driver.

If a Windows XP, 2K, or NT driver has not
yet been installed, please install one before or
with the specified 9X driver.

●

If a Windows XP, 2K, or NT driver has
already been installed, it is possible that the
driver name of the 9X driver does not match
that of the higher operating systems. Verify
that the driver specified is the correct driver.
If it is the correct driver, please

●

«
...
76
77
78
79
80
...
»

Summary of Contents for 4200 - LaserJet B/W Laser Printer















































































































































Reviews:

No comments

Related manuals for 4200 - LaserJet B/W Laser Printer

Brand: Sagem Pages: 96

Brand: Xerox Pages: 163

Brand: Canon Pages: 5

Brand: Sharp Pages: 58

Brand: Sharp Pages: 72

Brand: Sharp Pages: 68

Brand: Utax Pages: 122

Brand: Avision Pages: 57

Brand: Avision Pages: 74

Brand: Avision Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands