HP 3000 99x Family, Installation Manual, Page: 140 / 173

A-14 Appendix A
MPE/iX Configuration and SYSGEN
Default Configuration for 99x with HP-FL Boot Device (ALINK99x)
1. (Releases prior to MPE/iX 5.0) In the default configuration group, the ID may
incorrectly be given as HPA1700-60001. Use SYSGEN to change the ID to
HPA1809-60095.
2. (Non-preloaded and preloaded systems shipped before March 15, 1993) In the default
configuration group, LDEV 21 is incorrectly assigned to an HPC2204A disk. To use the
remote support modem, call up the SYSGEN program to assign LDEV 21 to a
HP28639-60001-CONSOLE-TERMINAL, and change the I/O path to 0/44.1 (see
procedure earlier in the chapter). Change other values to those shown in Table A-4.
3. In the default configuration group, the I/O path is incorrectly assigned to 0/24 and
0/24.1. If you are using these entries, use SYSGEN to change them to 0/28 and 0/28.1.
0/24.1
3
23 HPC2204A DISC EAGL_DISC_DM 8 LDEV_MGR 0
0/36 HP28642A-SCSI DA SCSI_DAM 6 0
0/36.0 PSEUDO DA TRANSPARENT_MGR 6 0
0/36.0.0 7 HPC1300S TAPE SCSI_TAPE_DM 10 LDEV_MGR 0
0/36.8 PSEUDO DA TRANSPARENT_MGR 6 0
0/36.8.0 6 HP2567B LP SCSI_DISC_DM 10 LDEV_MGR 0
0/36.9 PSEUDO DA TRANSPARENT_MGR 6 0
0/36.9.0 10 HPC1503B TAPE SCSI_TAPE_DM 10 LDEV_MGR 0
0/44 HP28639-60001-
CONSOLE/LAN DA LAN_8023_DRIVER 6 0
0/44.0 20 HP28639-60001-
CONSOLE-TER
MINAL TERM CDM_CONSOLE_DM 9 TIO_TLDM 0
0/44.1
2
21
2
HP28639-60001-
CONSOLE-TER
MINAL TERM CDM_CONSOLE_DM 9 TIO_TLDM 0
0/52 HP28616A DA NIO_ALINK_DAM 6 0
0/52.0 1 HPC2204A DISC EAGL_DISC_DM 8 LDEV_MGR 0
0/52.1 2 HPC2204A DISC EAGL_DISC_DM 8 LDEV_MGR 0
0/52.2 3 HPC2204A DISC EAGL_DISC_DM 8 LDEV_MGR 0
0/52.3 4 HPC2204A DISC EAGL_DISC_DM 8 LDEV_MGR 0
0/52.4 5 HPC2204A DISC EAGL_DISC_DM 8 LDEV_MGR 0
I/O
Path
Ldev
#
ID Type Pmgr Pmgrpri Lmgr Maxios