HP 3000 99x Family, Installation Manual

Page: 128 / 173

A-2 Appendix A
MPE/iX Configuration and SYSGEN
3. Activate the I/O Configurator by entering:
sysgen> IO
4. List all LDEVs predefined in the configuration group:
io> LDEV
5. Review the lists of predefined LDEVs and determine if all LDEVs required for this
installation are included in the list. Table A-2 and Table A-4 list entries for the different
configuration groups.
Steps 6 and 7 show how to add paths and devices. For complete instructions, refer to the
MPE/iX System Configuration Manual (HP part number 32650-90042).
6. To add a path (for a device adapter or a bus converter), use the APATH command. For
example, to add paths for an HP-FL (PB-FL) device adapter on a 990/992/991/995/996
System, enter:
io> APATH 2/52 HP28616A
To add the path for a HP-FL device adapter on a 997 System, enter:
io> APATH 2/28/52 HP28616A
To add paths for a bus converter (HPA1809-60005) in PMB slot 1 (paths 4 and 6) on
990/992/991/995/996 Systems, enter:
io> APATH 4 HPA1809-60005
io> APATH 6 HPA1809-60005
To add a path on a 997 System for an HSC I/O Expansion Module (HPA3567A) in PMB
slot 1, enter:
io> APATH 4 HPA3567A
To add a path on a 997 System for an HSC I/O Expansion Module in PMB slot 1 with an
HSC-to-HP-PB Bus Converter (HPA3568A) in module 0 and module 2, (path 4/28 and
4/28), enter:
io> APATH 4/28 HPA3568A
io> APATH 6/28 HPA3568A
7. To add devices, use the ADEV command. For example, to add an HP 7937FL disk drive
at path 4/52.0:
ADEV using keyword syntax:
io> ADEV LDEV=23 PATH=4/52.0 ID=HP7937FL
ADEV using positional syntax:
io> ADEV 23 4/52.0 HP7937FL
To add an HP 7937FL disk drive to a 997 System:
ADEV using keyword syntax:
io> ADEV LDEV=23 PATH=4/28/52.0 ID=HP7937FL
ADEV using positional syntax:
io> ADEV 23 4/28/52.0 HP7937FL