HP 3000 99x Family, Installation Manual, Page: 106 / 173

3-58 Chapter 3
Installation
Setting Boot Parameters
4. Compare the paths displayed on the Boot menu with the appropriate values for the
computer system (See Table 3-5 or Table 3-6). To change the path values, use the
PA
Path command.
a. To set the path values for a 99x with a SCSI system disk, enter the following
commands:
i. To set a primary boot path of 0/52.6.0:
Boot> PA P 0/52.6.0
ii. To set an alternate boot path of 0/52.0.0 (for a SCSI device):
Boot> PA A 0/52.0.0
iii. To set an alternate boot path of 0/12.0.3 (for an HP-IB device):
Boot> PA A 0/12.0.3
iv. To set console path of 0/44.0:
Boot> PA C 0/44.0
b. To set the path values for a 99x with a HP-FL system disk, enter the following
commands:
i. To set a primary boot path of 0/52.0:
Boot> PA P 0/52.0
ii. To set an alternate boot path of 0/36.0.0 (for a SCSI device):
Boot> PA A 0/36.0.0
Main> BO
------ Boot Commands --------------------------------------------------
Commands Available
PR Primary: Boot system using primary boot path.
AL Alternate: Boot system using alternate boot path.
AB Autoboot: Change the autoboot flag.
PA Path: Change a path (PA <path_type> <new_path>
<path_type>= Pri, Alt, Cons, or Update
Values stored in Stable Storage:
Autoboot Flag: TRUE
Primary Boot Path: 0/12.0.0.0.0.0.0
Alternate Boot Path: 0/36.0.0.0.0.0.0
Console/Keyboard Path: 0/44.0.0.0.0.0.0
HE Help: Display help text on menu selections
eXit: Return to previous menu
------
Boot>