manualshive.com logo in svg

HP Enterprise FlexNetwork 10500 Series, Configuration Manual

The HP Enterprise FlexNetwork 10500 Series brings advanced networking capabilities, ideal for high-performance enterprise environments. Enhance your understanding of its configuration and optimize its potential by accessing the comprehensive Configuration Manual available for free download at manualshive.com. Empower your network effectively with this essential manual.

Share
Download
background image

 

262 

============================================================================     

|NO. Size(B)   Time                 Type   Name                            |     

|1   4577      Feb/19/2013 13:07:54 N/A    flash:/labtop.cfg               |     

|2   141952    Feb/19/2013 13:07:54 N/A    flash:/labtop.mdb               |     

|3   341547    Feb/20/2013 12:00:15 N/A    flash:/logfile/logfile.log      |     

|4   0         Jul/29/2014 16:32:27 N/A    flash:/test.cfg                 |     

|5   1681      Jul/29/2014 17:34:42 N/A    flash:/vlan.txt                 |     

|6   8299      Jul/29/2014 17:36:00 N/A    flash:/test.txt                 |     

|7   27708416  Jul/31/2014 09:27:30 M      flash:/10500-CMW710-BOOT-R7557P0|     

|1.bin                                                                     |     

|8   208249856 Jul/31/2014 09:28:27 M      flash:/10500-CMW710-SYSTEM-R7557|     

|p01.bin                                                                   |     

|0   Exit                                                                  |     

============================================================================ 

 

 

NOTE: 

A maximum of to 998 files can be displayed. 

 

Changing the file attribute of a Comware software image 

Comware software image file attributes include main (M)  and  backup (B). A Comware software 
image can have any combination of the M and B attributes. An image with neither the M attribute nor 
the B attribute is marked as N/A. 

On an MPU, you can specify only one main image and one backup image for each type of Comware 
image. If you assign the same attribute to two images that are the same type, the most recent 
assignment causes the previously assigned attribute to be removed. 

For example, the boot image file main.bin has the M attribute and the boot image file update.bin has 
the B attribute. If  you assign the M attribute to update.bin, update.bin will have  both the M and B 
attributes (M+B), and the file attribute of main.bin will change to N/A. 

To change the attribute of Comware software images: 

1. 

Enter 

3

 in the File Control submenu. 

Enter your choice(0-5): 3                                                        

                                                                                 

 'M' = MAIN      'B' = BACKUP      'N/A' = NOT ASSIGNED                          

============================================================================     

|NO. Size(B)   Time                 Type   Name                            |     

|1   27708416  Jul/31/2014 09:27:30 M      flash:/10500-CMW710-BOOT-R7557P0|     

|1.bin                                                                     |     

|2   208249856 Jul/31/2014 09:28:27 M      flash:/10500-CMW710-SYSTEM-R7557|     

|p01.bin                                                                   |     

|0   Exit                                                                  |     

============================================================================     

Note:Select .bin files. One but only one boot image and system image must        

be included.                                                                     

Enter file No.(Allows multiple selection): 

2. 

Enter the numbers of the files you are working with. 

Enter file No.(Allows multiple selection):1                                      

Enter another file No.(0-Finish choice):2                                        

Enter another file No.(0-Finish choice):0                                        

Summary of Contents for FlexNetwork 10500 Series






































































































































































































































































































































Reviews:

No comments

Related manuals for FlexNetwork 10500 Series

Barksdale 8000 Series Operating Instructions Manual preview
8000 Series
Brand: Barksdale Pages: 6
ABLE 6 Series Installation & Maintenance Instructions preview
6 Series
Brand: ABLE Pages: 5
H3C s5800 series Configuration Manual preview
s5800 series
Brand: H3C Pages: 22
H3C S5500-EI series Quick Start preview
S5500-EI series
Brand: H3C Pages: 2
Qlogic SANbox 5802V User Manual preview
SANbox 5802V
Brand: Qlogic Pages: 135
Qlogic SANbox2 SANbox2-64 User Manual preview
SANbox2 SANbox2-64
Brand: Qlogic Pages: 224
S&C Omni-Rupter Installation Manual preview
Omni-Rupter
Brand: S&C Pages: 28
S&C Mark V Assembly And Installation Instructions Manual preview
Mark V
Brand: S&C Pages: 12
S&C Alduti-Rupter Instruction Sheet preview
Alduti-Rupter
Brand: S&C Pages: 24
S&C Alduti-Rupter Additional Instructions For Installation And Operation preview
Alduti-Rupter
Brand: S&C Pages: 24
S&C Vista SD Instruction Sheet preview
Vista SD
Brand: S&C Pages: 24
S&C Alduti-Rupter Installation Manual preview
Alduti-Rupter
Brand: S&C Pages: 28
S&C Vista SD Operation Manual preview
Vista SD
Brand: S&C Pages: 37
Jasco AS2006 Manual preview
AS2006
Brand: Jasco Pages: 2
National Instruments SCXI-1175 Getting Started Manual preview
SCXI-1175
Brand: National Instruments Pages: 23
Enterasys RoamAbout RBT-4102-BG Installation Manual preview
RoamAbout RBT-4102-BG
Brand: Enterasys Pages: 72
Topex multiSwitch User Manual preview
multiSwitch
Brand: Topex Pages: 170
LEGRAND Plexo Instructions Manual preview
Plexo
Brand: LEGRAND Pages: 140

Brands by name

Popular brands

Load more brands