141
Task
Command
Remarks
Display main startup
software images.
display install committed
[
chassis
chassis-number slot slot-number
]
[
verbose
]
N/A
Display inactive software
images.
display install inactive
[
chassis
chassis-number slot slot-number
]
[
verbose
]
N/A
Display the software
images included in
an .ipe file.
display install ipe-info
ipe-filename
N/A
Display ongoing ISSU
activate and deactivate
operations.
display install job
N/A
Display ISSU log entries.
display install log
[
log-id
] [
verbose
]
N/A
Display software image
file information.
display install package
{
filename
|
all
}
[
verbose
]
N/A
Display all software
image files that include a
specific component or
file.
display install which
{
component
name
|
file
filename
} [
chassis
chassis-number slot slot-number
]
N/A
Display ISSU status
information.
display issu state
This command applies only to an
ISSU that uses
issu
commands.
Display version
compatibility information
and identify the upgrade
method.
display version comp-matrix
N/A
Clear ISSU log entries.
reset install log-history oldest
log-number
N/A
Troubleshooting ISSU in IRF mode
Failure to execute the issu load/issu run switchover/issu
commit/install activate/install deactivate command
Symptom
The following commands cannot be executed:
•
issu commands
—
issu load
,
issu run switchover
, and
issu commit
.
•
install commands
—
install activate
and
install deactivate
.
Solution
To resolve this issue:
1.
Use the
display device
command to verify that all cards are not in
Fault
state.
2.
Use the
display mdc
command to verify that all MDCs are in
active
state.
3.
If the problem persists, contact Hewlett Packard Enterprise Support.
Summary of Contents for FlexNetwork 10500 Series
Page 139: ...130 Sysname display version ...
