HP Enterprise FlexNetwork 10500 Series, Configuration Manual

Page: 262 / 325

253
Table 38 DEVICE CONTROL menu options
Option Task
<1> Display All Available Nonvolatile Storage Device(s)
Display all storage media on the MPU you are
working with.
<2> Set The Operating Device
Set the current storage medium. All file
operations in BootWare menus are performed
on the current storage medium.
<3> Set The Default Boot Device
Set the default storage medium from which the
system will start up.
<0> Exit To Main Menu Return to the EXTENDED-BOOTWARE menu.
Using the EXTENDED ASSISTANT menu
1. In the EXTENDED-BOOTWARE menu, press
Ctrl+Z
to enter the EXTENDED ASSISTANT
menu.
=========================<EXTENDED ASSISTANT MENU>==========================
|<1> Display Memory |
|<2> Search Memory |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-2):
2. To view memory information, enter
1
, and then provide the memory address and length.
Enter your choice(0-2): 1
Info: Press Ctrl+C to abort or return to EXTENDED ASSISTANT MENU.
Info: Enter the address and length in hexadecimal notation.
Info: Only 4 bytes mode supported.
Enter memory address:80
Enter memory length:2
00000080: 3c1b8f10 277b0a04 ........
3. To search memory for certain data, enter
2
, and then provide the start and end addresses and
the value of interest.
Enter your choice(0-2): 2
Info: Press Ctrl+C to abort or return to EXTENDED ASSISTANT MENU.
Info: Enter the address and value in hexadecimal notation.
Info: Only 4 bytes mode supported.
Enter start address:80
Enter end address:90
Enter the value to search for:0000
00000080: 3c1b8f10 277b0a04 03600008 00000000 <...'{...`......
NOTE:
The device displays and searches for memory information in 4-byte mode. If the memory address
you enter is not a multiple of 4 bytes, the device automatically adjusts it.
Table 39 describes the error messages that might appear when you use the EXTENDED
ASSISTANT menu.