HP Enterprise FlexNetwork 10500 Series, Configuration Manual

Page: 252 / 325

243
Option Task
<2> Update Main Image File
Download Comware software images to the current
storage medium as main images (the file attribute is set
to M).
As a result, the M file attribute of the original main
images is removed.
<3> Update Backup Image File
Download Comware software images to the current
storage medium as backup images (the file attribute is
set to B).
As a result, the B file attribute of the original backup
images is removed.
<4> Download Files(*.*)
Download files to the current storage medium.
This option is only available when password recovery
capability is enabled.
<5> Modify Ethernet Parameter Configure FTP or TFTP file transfer settings.
<0> Exit To Main Menu Return to the EXTENDED-BOOTWARE menu.
2. Enter 5 in the Ethernet submenu to configure file transfer settings.
Enter your choice(0-5):5
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :FTP
Load File Name :10500.ipe
:
Target File Name :10500.ipe
:
Server IP Address :172.1.88.125
Local IP Address :172.1.88.22
Subnet Mask :0.0.0.0
Gateway IP Address :0.0.0.0
FTP User Name :lhw
FTP User Password :***
Table 34 Setting Ethernet parameters for file transfer
Field Description
'.' = Clear field
Press the dot (.), and then press Enter to clear the setting for a
field.
'-' = Go to previous field
Press the hyphen (-), and then press Enter to return to the
previous field.
Ctrl+D = Quit Press
Ctrl+D
to exit the Ethernet parameter settings menu.
Protocol (FTP or TFTP) Set the file transfer protocol to FTP or TFTP.
Load File Name Set the name of the file to be downloaded.