horsch Titan 34 UW, Operating Instructions Manual

Page: 8 / 71

Introduction
Foreword
Before operating the machine, read and strictly
comply with the operating instructions. In doing
so, you will avoid accidents, reduce repair costs
and downtime and increase the reliability and
service life of your machine. Pay attention to
the safety notices!
HORSCH will not assume liability for any dam-
age or malfunctions resulting from failure to
comply with the operating instructions.
These operating instructions will assist you in
getting to know your machine and in using it cor-
rectly for its intended purposes.
The operating instructions must be read and
strictly adhered to by all persons working on or
with the machine e.g.:
•
Operation (including preparation, fault rectifi -
cation during work, servicing)
•
maintenance (maintenance and inspection)
•
Transport
Together with the operating instructions, you
also receive an acknowledgement of receipt.
The trained personnel of our service and sales
partners will train and instruct you in the opera-
tion and maintenance of your machine. After this
you or the sales or service partner should return
the receipt back to HORSCH. This confirms your
formal acceptance receipt of the machine.
The warranty period starts with the date of
delivery.
We reserve the right to alter illustrations as well
as technical data and weights contained in these
operating instructions for the purpose of improv-
ing the machine.
The illustrations in these operating instructions
show different versions of the implement and
different equipment variants.
Notes on representation
Warning notes
These operating instructions differentiate be -
tween three different types of warning notes.
The following signal words with warning sym-
bols are used:
DANGER
Highlights a danger that will lead to death or
severe injury, if it is not avoided.
WARNING
Highlights a danger that can lead to death or
severe injury, if it is not avoided.
CAUTION
Highlights a danger that can lead to injury, if it
is not avoided.
Please read the warning notes given in these
operating instructions!
Instructions
In the operating instructions all instructions for
actions are identified by arrow heads
¾
...
¾
...
If compliance with a certain sequence is re-
quired, the steps of actions are successively
numbered.
1. ...
2. ...
3. ...
...
Identifies important notes.
The designations “right”, “left”, “front” and “rear”
apply as seen in travel direction.
4