horsch Titan 34 UW, Operating Instructions Manual

Page: 32 / 71

2
1
PTO shaft
1 Bracket for parking
2 Chain
Hitching up and transport
position
DANGER
There is a possibility that persons may become
crushed and severely injured between machine
and tractor!
Instruct persons to leave the area between trac-
tor and machine.
Hitching up
¾
Hitch the machine up to the tractor.
¾
Connect hydraulic hoses, brake system lines
and cables for lighting and weighing device.
¾
Release the parking brake, press the button
on the brake valve up to do so.
Operate the control unit for the support and fold
in the support.
Check plug connections (hydraulic, electric and
pneumatic) for cleanliness and tight fit.
Dirty connectors will contaminate the flowing
media. The connectors therefore become worn
and this results in malfunctions and failures in
the connected assembly groups.
Plug-in couplings are marked to avoid
wrong connections.
When cornering to the right the folded in
emptying auger may collide with the
tractor wheels. The steering angle
should not be too big.
When operating hydraulic components, slow
down the control unit before the machine com-
ponents reach the limit stop.
Load bearing capacity of the tyres
When utilizing max. load bearing capacity the
tyres must be inflated with 3.8 bar, the max.
speed is in this case limited to 15 km/h.Other
the tyres may be damaged by overload.
Check the tyre pressure regularly, preferably
once every day!
28