horsch Titan 34 UW, Operating Instructions Manual

Page: 57 / 71

53
5. Now drive the tractor with the loaded reload-
ing wagon onto the scales, weight the vehicle
and write down the weight, e.g. minus the curb
weight from point 1, results in 20600 kg.
6. Press the keys and for approx.
3 seconds. The display shows "SETUP" with
a 6-digit number (the right digit is flashing).
7. Press button . The display shows "CAL"
with a 5-digit number (the right digit is flash -
ing) - the previous calibration value. Write
down this number.
8. Now you can calculate the new calibration
value.
setup
6 6
CAL 21350
7
9. Enter the new calibration value (the right
digit is flashing).
Keep pressing the button , until the cor-
rect number is displayed.
Press button , to move to the next digit
to the left - the digit flashes.
Keep pressing the button , until the cor-
rect number is displayed.
Repeat this process, until the new calibration
value has been entered.
10. Finally press the button to save the
new calibration value. The display returns to
the weight indication.
11. Check the display with the known weight
once again.
21165
1
3
4
1
Weight (scales)
Weighing display
e.g.
20.600 kg
20780 kg
The new calibration value is 21165
x 21350 = 21165
x old calibration value