manualshive.com logo in svg

horsch Titan 34 UW, Operating Instructions Manual

Share
Download
horsch Titan 34 UW Operating Instructions Manual Download Page 52

48

 

Data backup

With the optionally available Data Downloader 

(DDL) it is possible to transfer the data from the 

weighing equipment through a serial interface or 

with an adapter via USB to the home computer. 

1

2

3

4

Scope of delivery of the DDL-kit 

1 

Connecting cable DDL - Computer

2 

Data Downloader (DDL)

3 

Software Data Transfer Utilities (DTU)

4 

Connecting cable "Display - DDL"

1.  Install the software on the PC.

Install the DTU-software on the PC.Install the 

software on the PC. For this purpose insert 

the CD-ROM into the drive and follow the 

instructions on the screen. 

2.  Connect the cable with the computer

Connect the enclosed cable with the serial, 

or via adapter, with the USB interface of the 

computer. The serial interface is also referred 

to as COM-interface. The 9-pin D-Sub plug of 

the cable must be reliably connected with the 

computer, to ensure proper functioning. 

3.  Connect the DDL with the display of the 

weighing equipment. 

For this purpose use the serial interface on 

the underside of the display. This is the same 

connection that is used to connect the printer. 

The DDL is plugged into the serial interface of 

the display and secured by the thread. If there 

is poor access to the display, the connecting 

cable "Display - DDL" can be used instead. 

Serial interface on underside of display.

Press the push button to save the data to 

the DDL. See chapter "Print field ID and cu

-

mulated values". Once the backup process 

is finished, the DDL can be removed again. 

4.  Connect the DDL with the computer.

Screw the module to the screw bushing on 

cable to connect the DDL to the computer. 

With just a turn, both parts are connected. 

5.  Read the DDL out on the computer.

Follow the instructions, which came with the 

CD-ROM. 

With the optional Y-cable the data from the 

weighing equipment can be printed and 

backed up to the DDL at the same time. The 

procedure is quite similar to the procedure 

with the standard connecting cable between 

DDL and display. The printer is connected in 

addition to the DDL.

Y-Cable

Summary of Contents for Titan 34 UW








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands