horsch Titan 34 UW, Operating Instructions Manual

Page: 12 / 71

Personal protective outfit
Missing or incomplete protective outfit increases
the risk of health damage. Personal protective
outfit includes, e.g.:
¾
Tight fitting clothes / protective clothing, pos -
sibly a hair net
¾
safety shoes
¾
safety gloves
¾
Determine the personal protective outfit´for
the corresponding work place.
¾
Provide effective protective equipment in
proper condition.
¾
Never wear rings, bracelets or other jewellery.
Safety in traffic
DANGER
No passengers are allowed to ride on the
machine!
Pay attention to the permissible transport widths
and heights. Pay attention to the transport height
when passing under bridges and low hanging
overhead power lines.
Do not exceed the permissible axle loads, tyre
carrying capacities and total weights, in order to
ensure sufficient steering and braking capabili -
ties. The front axle must be loaded with at least
20 % of the tractor weight.
For road transport the machine must be set to
transport position. The machine must have been
folded up and secured, see chapter “Folding” and
“Hitching up and transport position”.
Clean soil from the folding areas before folding
up. Otherwise there could be damage to the
mechanics.
¾
Assemble lighting, warning and protective
equipment and check the function.
¾
Before driving on roads clean the entire ma -
chine from picked up dirt.
Handling is affected by the connected equipment.
¾
Pay particular attention to the wide overhang
and the centrifugal mass of the working imple-
ment when cornering.
Lifted machine (Three-point hydraulics):
¾
Consider the limited stability and steerability
of the tractor.
For transport on public roads pay atten-
tion to the permissible top speed men-
tioned in the operating licence!
The specifications in the type approval
documenht or in the technical data are de-
cisive for the design dependent top speed.
Always match the travel speed to the
road conditions to avoid accidents and
damage to the undercarriage.
Consider your personal abilities, carriage
way, traffic, sight and weather conditions.
Safety in operation
Commissioning
The operational safety of the machine cannot
be guaranteed without an orderly performed
commissioning. This can lead to accidents with
severe or even fatal physical injuries.
¾
The machine must only be put into operation
after receiving instructions by employees of the
authorized dealer or a HORSCH employee.
¾
The machine registration form must be com-
pleted and returned to HORSCH.
All protective features and safety equipment,
such as detachable protective devices (wedges,
etc.), must be correctly in place and reliably func-
tioning before the machine is put into operation.
¾
Check nuts and bolts, especially the ones on
wheels and cultivation tools regularly for tight
fit and retighten if necessary.
¾
Check the tyre pressure at regular intervals,
see maintenance overview.
8