horsch Titan 34 UW, Operating Instructions Manual

Page: 63 / 71

Lubrication points
(Lubrication grease: DIN 51825 KP/2K-40) - Number of lubrication points in brackets
PTO shaft Lubricate the universal joints, grease the sliding tube 50 h
Drive shaft bearings Grease the bearings (4) 50 h
Double joint on gearbox Lubricate the universal joint (2) 50 h
Folding cylinder Lubricate the bolt (1) 50 h
Caterpillar undercarriage - hubs of
undercarriage wheels
lubricate (8) 50 h
replace every
two years
Caterpillar undercarriage - hubs of
middle wheels
lubricate (8) 50 h
replace every
two years
Caterpillar undercarriage - pre-
tensioning cylinder
lubricate (4) 50 h
Caterpillar undercarriage - pivoting
journal
lubricate (8) 50 h
At the end of the season
Clean the machine Do not spray plastic parts with oil or similar
Piston rods Spray with anti-corrosion oil
Hydraulic hoses
¾
Check the hydraulic hoses regularly for damage (cuts, chafing, etc.).
¾
Replace damaged and faulty hoses immediately.
¾
Hydraulic hoses must be replaced after 6 years. For this purpose pay at-
tention to the manufacturing date on the hose line (year/month) and on
the hose (quarter/year):
Hose line Hose
¾
Depending on the conditions of use (e.g. weather influences) or in case of
higher strains on the machine the hoses may need to be replaced earlier.
¾
Have the hydraulic system checked by an expert at least once every year.
¾
In addition follow the country specific regulations and directives.
59