horsch Maestro CX, Translation Of The Original Operating Instructions

Page: 95 / 184

Drill unit | 8
60013444 • 01 • 01/2021 • en 95
8.1.6.1 Clearing stars for single disc coulter
Adjusting the working
depth
WARNING
Serious crushing due to lowering / dropping machine parts.
Ø
Support the raised machine by appropriate means.
Ø
Do not work under the raised machine without proper safeguards.
The position of the clearing starts is set on the hole pattern via the adjustment bolts.
The stop position toward the top or bottom increases in this case each from position
1 to 9:
1
2
1
1
2
2
3
3
4
4
5
5
6
6 7
7
8
8
9
9
1 Limit toward the top
2 Limit toward the bottom
1. To adjust remove the bolt lock, take off the clearing star, pull out the bolt, re-
insert as follows in the new position and secure it.
2. Adjust all clearing stars equally.
Depending on the row in which the adjustment bolt (1) is positioned, the respective
fitting elongated hole must be used for the upper bolt (2):