horsch Maestro CX, Translation Of The Original Operating Instructions

Page: 70 / 184

7 | Pneumatic system
70 60013444 • 01 • 01/2021 • en
7.4.3 Fertiliser quantities
Working speed
Machine
10 km/h 12 km/h 15 km/h
Maestro CX 360 300 240
Table 2: Maximum fertiliser quantities in kg/ha
Depending on the type of fertiliser, the max. possible quantity may even be less.
7.5 Drive with PTO-shaft pump
The fans can alternatively also be driven by a PTO-shaft pump.
WARNING
Risk of accident
The PTO-shaft pump may be thrown off the shaft on the tractor and cause severe
injury to persons.
Ø
Operate the pump only with reliably fastened anti-twist lock.
WARNING
Risk of accident
Ø The parking position on the drawbar must only be used with the machine
shut down!
Ø
For road travel or in the field the pump should always be mounted to the
tractor!
NOTE
Ø
Allow the PTO-shaft pumps to warm up prior to use in the field for approx.
5 min at idle speed.
Ø
Fasten the pump with the bracket firmly but stress-free to the tractor, other-
wise the pump or the gear could get damaged.
Ø
Observe the maximum rotary speed of 800 rpm to prevent damage to the
gearbox!
1. Plug the pump on to the PTO-shaft.
2. Fasten the anti-twist lock. Fix the adjusting rod in the slot and in the bolt for
the upper link without applying any tension. Match height and distance.