horsch Maestro CX, Translation Of The Original Operating Instructions

Page: 133 / 184

Optional equipment | 14
60013444 • 01 • 01/2021 • en 133
NOTE
Ø
Before parking the machine engage the parking brake again.
Spring accumulator brake
cylinder
DANGER
Serious accidents through the pretensioned spring
Ø Never open the spring accumulator brake cylinder by force nor dismantle it!
Mechanical release fixture
The parking brake may need to be released without the required pressure being
available in the air vessel. To this end, the spring accumulators can be released using
the mechanical auxiliary release device.
1
2
Spring accumulator brake cylinder with installed release device (1)
1. Place wheel chocks under the wheels.
2. Remove the threaded rod from the parking position (2) and fasten it in the cyl-
inder (1).
3. Apply washer and nut and release the brake by unscrewing the threaded rod.
4. After the required measures (towing, retrieving, etc.) have been completed,
screw in the threaded rod to engage the brake again.
5. Pull the threaded rod with nut and washer from the brake cylinder and fasten
it in the parking position.