horsch Maestro CX, Translation Of The Original Operating Instructions

Page: 77 / 184

Pneumatic system | 7
60013444 • 01 • 01/2021 • en 77
NOTE
Ø
Check all closures on the central distributor after cleaning.
Seed jammed at the maintenance flaps causes leaks!
Air losses in the area of the central distributor may cause serious drilling er-
rors!
Error messages in the drill controls may be caused by air losses in the
MTS System or in the !
Closing the outlets If individual rows are no supplied with seed, the outlets can be closed with blind
plugs.
1. Loosen the bayonet lock on the connection and remove the hose.
2. Plug in the blind plug and lock the bayonet lock:
1.
2.
NOTE
Ø On all outlets, either a hose must be connected to the metering unit or a blind
plug inserted.
Air losses in the area of the central distributor may cause serious drilling er-
rors!
Error messages in the drill controls may be caused by air losses in the
MTS System or in the !