horsch Maestro CX, Translation Of The Original Operating Instructions

Page: 31 / 184

Technical data | 4
60013444 • 01 • 01/2021 • en 31
4.3 Requirements on the tractor
WARNING
Risk of accident from overloading the tractor.
Ø
Observe the permissible values of the tractor for axle loads, total weight, tyre
load bearing capacity and air pressure.
CAUTION
Damage to the three-point power lift of the tractor
Operating single-acting three-point power lifts on tractors may case damage to the
lifting unit. The company will not assume any liability for this.
Ø Operate the machine only on tractors with dual-acting three-point power lifts.
Ø
Follow the operating instructions of the tractor.
Ø Verify the suitability of the tractor before commissioning.
The tractor must meet the following requirements to be able to use the machine as
intended:
Implement attachment
Maestro 8/9/12 CX
Adjustable drawbar circular drawbar eye
with ball and socket joint Bolt Ø 32 mm
Bolt Ø 42 mm
Adjustable drawbar – circular drawbar
eye Bolt Ø 40 mm
Adjustable drawbar – pivoting drawbar
eye Bolt Ø 50 mm
Ball head K 80
Tractor link arm Cat 3N (Cat. II/III)
Cat 3 (Cat. III/III)
Cat 4N (Cat. III/IV)
*Tractor link arm implement attachment:
III: Coupling point distances Cat. III Pin diameter Cat. III
IV: Coupling point distances Cat. IV Pin diameter Cat. IV
II/III: Coupling point distances Cat. II Pin diameter Cat. III
III/IV: Coupling point distances Cat. III Pin diameter Cat. IV