horsch Maestro CX, Translation Of The Original Operating Instructions

Page: 132 / 184

14 | Optional equipment
132 60013444 • 01 • 01/2021 • en
1. Weigh the axle load of the empty machine in transport position.
2. Set the operating pressure to 6.5 bar on the yellow coupler (pressure regulator
and pressure gauge are required).
3. Connect a second pressure gauge to the test port (7) of the brake valve unit.
8
9
4. Set the regulator according to the pertaining sticker (full and empty). Loosen
the lever (8) on the tooth shaft and adjust the tooth shaft (9).
Achslast
Axle load
Charge Essieu
kg
Ausgangsdruck
Output pressure
Pression de sortie
bar
A-1: 6.300 3.800
A-1: 6.700
4,3
4.500
4.100
4.100
3,2
A-1: 7.800
5.400
4.900
A-1: 8.400 5.400
A-1: 9.000
6.400
5.900
5.900
3,4
4,1
4,4
4,8
4,6
5,3
5,6
5,9
Achslast
Axle load
Charge Essieu
min. kg max.
Ausgangsdruck
Output pressure
Pression de sortie
bar
beladen
loaded
chargé
leer
emtpy
vidé
Eingangsdruck / Input pressure / Pression d´entrée
bar
6,5
WABCO 475 713 000 0
Ventil Nr. / Valve No. / Valve N°.
Maestro CV / CX M19
Einstellwerte der manuellen lastabhängigen Bremskraftregelung:
Settings of the manual load sensing device:
Valeurs de réglage de la correction de freinage manuelle asservie à la charge:
A-1: 7.200
4.900
4.500 3,7 4,9
60007016
Brake valve unit sticker
Releasing the brake
The brake of the parked machine can be released manually on the brake valve unit.
This is only possible if adequate air is present in the air vessel to open the spring ac-
cumulator.
DANGER
Uncontrolled rolling of the machine may cause severe injuries by
crushing or rolling over.
Ø
Park the machine only on level ground with sufficient load bearing capacity.
Ø Secure the machine with wheel chocks against rolling before releasing the
brake.
1. Press the button (5) to release the brake or pull it out to apply the brake.
2. Push the button (6) to release the parking brake.