horiba TW-100, Instruction Manual

Page: 87 / 175

5 FUNCTION
75
5.2.1 Setting EXT I/O IN
1.
Press the EXT I/O IN SETTING button on the I/O SETTING 1/2 screen.
The EXT. I/O IN SETTING screen is displayed.
2.
Select the items by using the buttons, and press [SET].
Return to the I/O SETTING 1/2 screen.
5.2.2 Setting external output during operation
This section explains the following 4 output setting methods.

ALG. OUT (MAINTE.)

ALG. OUT (SEQ.)

ALG. OUT (ALARM)

WARMING UP
1.
Press the button for output item to configure on the I/O SETTING 1/2 screen.

ALG. OUT (MAINTE.)

ALG. OUT (SEQ.)

ALG. OUT (ALARM)

WARMING UP
The corresponding screen for each item is displayed.
* This example shows the screen for maintenance mode output.
See "

The I/O SETTING screen" (page 74).
[I/O]
[MAINTE.]
[SETTING]
I/O SETTING screen
MEAS. screen
MAINTENANCE screen
SETTING1/2 screen
EXT. I/O IN
/[I/O]
[OFF]
/[SERIAL]
Item Explanation
OFF Button operation only (No external input).
Contact Accept input using the contact connection.
SERIAL Accept input using the RS-232C connection.
See "

The I/O SETTING screen" (page 74).
[I/O]
MEAS. screen
MAINTENANCE screen
SETTING1/2 screen
[SETTING]
I/O SETTING 2/2 screen
I/O SETTING 1/2 screen
[MAINTE.]
[ ]
[HOLD]
/[DIRECT]
/[PRESET xxmA]