![background image](http://html1.mh-extra.com/html/horiba/tw-100/tw-100_instruction-manual_2162280082.webp)
4 CALIBRATION
70
4.10 Calibrating Water Temperature
Water temperature is optional.
Water temperature is already calibrated before shipment, so additional calibration is
unnecessary. The calibration procedure is given as a reference. Only when an abnormality
occurs, check that the calibration value is not far from the manually-analyzed value.
4.10.1 Adjustment calibration using sample water <water temperature>
Preparation
Thermometer...1
Calibration procedure
1.
Measure water temperature of the sample water using a thermometer other than
this device's and calculate the value.
2.
Press the SAMPLE VALUE button ([xx.x]) on the TEMP. CAL. screen.
The sample water calibration value input screen is displayed.
3.
Enter the measured temperature of the sample water using the numerical key pad
and press [SET].
Input range: 0.0
C to 50.0
C
Tip
[CLEAR]: Clears the whole value.
[BACK]: Deletes the rightmost number of the value.
The screen returns to the TEMP. CAL. screen.
4.
Press [SAMPLE].
A confirmation screen is displayed asking whether to start calibration.
MEASUREMENT screen CALIBRATION screen TEMP. CAL. screen
See "4.3 Displaying the Calibration Screen" (page 23).
[CAL.] [TEMP.]
[xx.x]
Summary of Contents for TW-100
Page 1: ...Water Distribution Monitor TW 100 Instruction Manual CODE GZ0000080187H ...
Page 8: ......
Page 174: ......