Installation
BA_sun_power_pack_LiOn_en_V1.05.docx
V1.05 (20/07/2017) 6140203036
36
7.5.
Commissioning
Switch the battery inverter on. With successful assembly and installation and correct
connection to the battery inverter, the current state of charge is shown in the display unit of
the battery system in percent and the instantaneous charging or discharging power is
displayed (see Figure 24). In charging mode, the arrow points in the direction of the battery
icon. In the discharging mode, the arrow points away from the battery icon. With this, the
installation has been completed successfully.
Note:
Configure the battery inverter according to the manufacturer's specifications.
Note:
If the battery is in deep discharge condition, after restarting the BMS, there are 3 minutes left to
set up the charging current. If the BMS detects a charging current within the 3 minutes time, the
BMS remains active and the battery may be charged fully.
Figure 24: Display unit (Example of standard display)
If a warning or error condition is present, this is displayed with an exclamation mark
(Warning) or an "X" symbol (Error) in the display unit (see Figure 25). See also chapter 12.
No. Description
1
Icon for active warning
Figure 25: Display unit (example for symbolising an active warning)
