Honeywell UDC 2300, Product Manual

Page: 175 / 185

Index
12/00 UDC2300 Controller Product Manual 165
Thermocouple Inputs Using an Ice Bath, 87
Three position step control, 100
Three Position Step Control, 36
Three Position Step Control algorithm, 67
Three Position Step Control Connections, 17
THREE POSITION STEP CONTROL OUTPUT
START-UP MODE, 147
TIME COUNT INCREMENT, 136
Time Proportional Output failure, 110
TIME REMAINING, 60
TIME-OUT, 60
Time-out Period, 26
TIMEOUT PERIOD, 145
Timer, 59
Timer Count Increment, 26
Timer Display, 26
Timer Function Start, 26
TIMER OPTION, 156
Timer Reset Control, 26
TIMER RESET CONTROL, 150
Timer Set Up Group, 26
TIMER START SELECTION, 155
Transmitter Characterization, 33
TRANSMITTER CHARACTERIZATION, 158, 159
Transmitter Characterization for, 35
Troubleshooting Aids, 102
troubleshooting procedures, 108
Troubleshooting/Service, 101
TUNE, 31, 61
Tune for Duplex (Heat/Cool), 62
Tuning, 27
Tuning indicators, 61
Tuning Set Up Group, 27
Two Sets of Tuning Constants, 64
U
Universal Output Functionality and Restrictions, 12
UPSCALE BURNOUT, 126
V
Vibration, 4
Voltage and Resistance Equivalents for 0% and 100%
Range Values, 84
W, X, Y, Z
WARNING—SHOCK HAZARD, 108
Wiring, 11
Wiring Bundling, 12
Wiring Connections for 1 to 5 Volt Input – Input 2,
92
Wiring Connections for 4 to 20 mA Input – Input 2,
91
Wiring Connections for Calibrating Auxiliary Output,
98
Wiring Connections for Calibrating Current
Proportional Output, 96
Wiring Connections for Radiamatic, Milliampere,
Millivolts, or Volts (Except 0 to 10 Volts), 89
Wiring Connections for RTD (Resistance
Thermometer Device), 88
Wiring Diagrams, 12
Wiring the Controller, 13
worksheet, 74