Honeywell UDC 2300, Product Manual

Page: 15 / 185

Installation
12/00 UDC2300 Controller Product Manual 5
2.2 Model Number Interpretation
Introduction
Write the model number into the spaces provided in Figure 2-1 and compare it to the model
number interpretation. This information will also be useful when you wire your controller.
0
D C 2 3 X
External Interface
0 _ = None
1 _ = RS422/485 ASCII / Modbus
2 _ = Auxiliary Output or Digital Input
Software Options
_ 0 = Single Display (includes Accutune II on DC230B)
_ A = Dual Display, MA, + Accutune II
_ B = Setpoint Programming (SPP), Dual Display,
MA, Accutune II
Manuals
0 _ = English
F _ = French (Europe)
G _ = German (Europe)
T _ = Italian (Europe)
S _ = Spanish (Europe)
Certificate
_ 0 = None
_ C = Certificate of
Conformance (F3391)
Options
0 _ _ _ _ _ _
= 90 to 264 Vac Power
1 _ _ _ _ _ _ = 24 Vac/dc Power
(requires Alarms plus IN 2)
_ 0 _ _ _ _ _ = UL and CE
_ A _ _ _ _ _
= UL, CE, CSA and (FM pending)
_ _ 0 _ _ _ _ = None
_ _ T _ _ _ _ = Customer ID Tag
_ _ _ 0 _ _ _
= None
_ _ _ F _ _ _ = Rear Terminal Cover
_ _ _ _ 0 _ _
= Gray Elastomer Bezel
_ _ _ _ B _ _ = Blue Elastomer Bezel
_ _ _ _ T _ _ = Tan Elastomer Bezel
_ _ _ _ _ 0 _
= Future
_ _ _ _ _ _ 0 = Future
B = Basic Controller Model
L = Limit Controller Model
I = Digital Indicator Model
Output #1
C _ = Current
E _ = Relay, E-M
A _ = Relay, SS 1 amp
S _ = Relay, SS 10 amp
T _ = Open Collector Output
Output #2 or Alarm #2 and Alarm #1
_ 0 = No additional outputs or alarms
_ E = Relay, E-M and Alarm #1
_ A = Relay, SS 1 amp and Alarm #1
_ S = Relay, SS 10 amp and Alarm #1
_ T = Open Collector Output and Alarm #1
PV Input
1 _ = T/C, RTD, Radiamatic, mV, 0-5 V, 0-20 mA, 4-20 mA
2_ = T/C, RTD, Radiamatic, mV, Volts, milliamps, 0-10 Volts
Optional Input 2
_ 0 = None
_ 1 = 0-5 V, 1-5 V, 0-20 mA, 4-20 mA
None
0 _ =
Figure 2-1 Model Number Interpretation