Honeywell SmartVFD HVAC MR4, User Manual

Page: 85 / 164

Honeywell
• 13 G
RAPHIC KEYPAD
-
INTRODUCTION
2.4.1 Quick setup
The Quick Setup Menu includes the minimum set of most commonly used parameters during
installation and commissioning. More detailed information on the parameters of this group you
will find in chapter 3.3.
2.4.2 Monitor
Multi-monitor
On the multi-monitor page, you can collect nine values that you wish to monitor.
Figure 5. Multi-monitoring page
Change the monitored value by activating the value cell (with arrow buttons left/right) and click-
ing OK. Then choose a new item on the Monitoring values list and click OK again.
Basic
The basic monitoring values are the actual values of selected parameters and signals as well
as statuses and measurements.
Timer functions
Monitoring of timer functions and the Real Time Clock. See chapter 3.4.3.
PID Controller 1
Monitoring of PID controller values. See chapters 3.4.4 and 3.4.5.
PID Controller 2
Monitoring of PID controller values. See chapters 3.4.4 and 3.4.5.
Multi-Pump
Monitoring of values related to the use of several drives. See chapter 3.4.6.
Fieldbus data
Fieldbus data shown as monitor values for debugging purposes at e.g. fieldbus commissioning.
See chapter 3.4.8.



Monitor
Multimonitor
(13)
Basic
(13)
Timer functions
(10)
STOP READY I/O
ID: M2.1
0.0rpm
STOP READY I/O
Multimonitor
0.00 Hz
ID25 FreqReference
Output Freq
0.00Hz
Motor Curre
0.00A
Motor Torque
0.00%
Motor Voltage
Motor Speed
Motor Tempera Unit Tempera DC-link volt
20.0 Hz
FreqReferenc
0.0V
0.0V 81.9°C 0.0%
ID:1 M2.1.1.1
STOP Ready I/O
FreqReference
Output frequency
Motor Power
FreqReference
Motor Speed
Motor Current
Motor Torque
0.00 Hz
10.00 Hz
0.00 rpm
0.00 A
0.00 %
0.00 %
Main Menu

Quick Setup
( 17 )

Parameters
( 12 )

ID: M1
STOP READY I/O
( 5 )
Monitor
