Honeywell SmartVFD HVAC MR4, User Manual

Page: 81 / 164

Honeywell
• 9 G
RAPHIC KEYPAD
-
INTRODUCTION
2.3.3 Local/remote control button
The LOC/REM button is used for two functions: to quickly access the Control page and to easily
change between the Local (Keypad) and Remote control places.
2.3.3.1 Changing the control place
The control place is the source of control where the drive can be started and stopped.
In the HVAC drive, the Local control place is always the keypad.
The Remote control place is determined by parameter M1.15 (I/O or Fieldbus).
Change of control place from Remote to Local (keypad).
1. Anywhere in the menu structure, push the Loc/Rem button.
2. Push the Arrow up or the Arrow down button to select Local/Remote and confirm with the
OK button.
3. On the next display, select Local or Remote and again confirm with the OK button.
4. The display will return to the same location as it was when the Loc/Rem button was
pushed.
LOC
REM
OK
OK
ID:
Choose action
STOP Ready Keypad
ID:1805
Local/Remote
Control page
Change direction
?
Remote
ID:
Local/Remote
STOP READY Keypad
ID:211
Remote
Local
Main Menu
Parameters
( 15 )

Diagnostics

STOP READY Keypad
ID: M1
( 7 )
Monitor

( 6 )
Main Menu
Parameters
( 15 )

Diagnostics

STOP READY I/O
ID: M1
( 7 )
Monitor

( 6 )