Honeywell Rapid Eye Hybrid LT Installation Manual Download Page 6

Page: 6 / 86

Contents

Dynamic Host Configuration Protocol Using DNS . . . . .  . . . . . . . . . . . . . . .  . . . . 37
Dynamic Host Configuration Protocol Without DNS . . . .  . . . . . . . . . . . . . . .  . . . . 38
Network Address Translation Using an Internet Router  . .  . . . . . . . . . . . . . . .  . . . . 38
Testing a Network Connection in the Field.  . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 39

Dial-up Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

DVR Internal Modem Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Testing a Dial-Up Connection in the Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Upgrading the Software of a DVR Onsite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Use of Media by the DVR, for Clip Distribution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Quick Test for Remote Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Software for the Remote Operation of Hybrid LT DVRs . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Checklist for Admin Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Checklist for View Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Obtaining Live Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Avoiding Installation Problems for Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Spot-Checking Recorded Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Calibrating Tamper Detection for Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Calibrating Rows of Mobile Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Firewall Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Audio at a Hybrid LT Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Checking For Audio Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Audio for Operators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Sending and Receiving Audio Offsite   . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 51
Monitoring and Recording Audio . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 52
Enabling Talking to a Site   . .  . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 52

Onsite Audio Using LocalView . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Disabling Audio for LocalView . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Site Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Securing a Hybrid LT DVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Connectors for Serial Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Hardware Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Public Display Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Using LocalView for Public Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Connecting a PTZ Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

ACUIX Analog PTZ Cameras .  . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 57
Many PTZ Domes on One Serial Communications Line . .  . . . . . . . . . . . . . . .  . . . . 57
Configuring PTZ   . . . . . . .  . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 58

Alarm Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Connecting an Alarm Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Inputs for Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Configuration Using View Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Technical Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Control Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
System Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Point-of-Sale Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

NetPIT and PIT Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Port Use Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Internal Port: Internal Modem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Appendix A

Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Summary of Contents for Rapid Eye Hybrid LT























































































Search results

Summary of Contents for Rapid Eye Hybrid LT

Reviews:

Related manuals for Rapid Eye Hybrid LT

Brands by name

Popular brands

Honeywell Rapid Eye Hybrid LT, Installation Manual

Search results

Summary of Contents for Rapid Eye Hybrid LT

Reviews:

Related manuals for Rapid Eye Hybrid LT

Brands by name

Popular brands