Honeywell Rapid Eye Hybrid LT, Installation Manual

Page: 39 / 86

Rapid Eye™ Hybrid LT DVR Installation Guide
Document 800-07766V4 Rev A 39
01/2013
Figure 2-9 LocalView Panel for Network Settings
Testing a Network Connection in the Field
To test a network connection, PING the DVR.
Dial-up Connection
The internal modem is only supplied with North American Rapid Eye Hybrid LT units.
European units requiring modem functionality require an external modem connected to
Serial Port 1 or 2 (see the documentation that came with the external modem for connection
information). The following instructions describe using the internal modem with North
American units.
Figure 2-10 TELCO Port for Dial-up Connection (North American Units Only)
1. Using a standard telephone cable with RJ11 connectors, plug one connector into the
TELCO port on the DVR (see Figure 2-10 ).
SERIAL PORT 2
SERIAL PORT 1 VGA
TELCO
USB USB
LAN
IN
OUT
NOT
USED
1 2 3 4 5 6 7 8
SPOT
MONITOR
VIDEO
INPUTS
COMMON
SYS FAIL
SYS GOOD
F AULT
RELAY
28V, 3A
MAX
1 G G G G 2 3 4
CONTROL
OUTPUTS
SERIAL
PORT 3
SERIAL
PORT 4
1 G G G G 2 3 4 5 G G G G 6 7 8
ALARM INPUTS
ON/OFF
POWER
115-230V~
50/60 Hz
5-3A
TELCO
USB
LAN
SERIAL PORT 2
SERIAL PORT 1 VGA
TELCO
USB USB
LAN
IN
OUT
NOT
USED
1 2 3 4
5
6 7 8
SPOT
MONITOR
VIDEO
INPUTS
COMMON
SYS FAIL
SYS GOOD
F A U LT
R ELAY
28V, 3A
M A X
1 G G G G 2 3 4
CONTROL
OUTPUTS
SERIAL
PORT 3
SERIAL
PORT 4
1 G G G G 2 3 4
5 G G G G 6 7 8
ALARM INPUTS
ON/OFF
POWER
115-230V~
50/60 Hz
5-3A
Telco port