Honeywell Rapid Eye Hybrid LT, Installation Manual

Page: 36 / 86

36
Installation
Figure 2-5 Accessing the Network Settings Using LocalView
Quick Setup Wizard
For a common network connection, changes to the IP address can be made using the
Quick Setup Wizard; refer to the
Rapid Eye™ Hybrid LT Quick Start Guide . To setup a
different type of network connection, see the procedures on the next few pages; the Quick
Setup Wizard and Help are not needed.
Remote Connection
After an IP address has been assigned to the DVR, a remote connection can be setup using
the Admin application. Refer to the
Rapid Eye™ Hybrid HD and Hybrid LT Digital Video
Recorders System Administrator Guide .
Note For dial-up connections, LocalView is not needed to help set up a remote
connection.
Using the Virtual Keyboard
Click the virtual keyboard icon ( ) to open and use the virtual keyboard ( Figure 2-6 ) to
input text into LocalView fields, if you do not have a keyboard connected to the Rapid Eye
Hybrid LT unit.
Figure 2-6 The Virtual Keyboard