E3 Series Installation/Operation Manual
—
P/N 9000-0574:I 11/04/10
33
Cabinets
Installation
2.5.3.1 E3BB-FLUSH-LCD, CAB A2, Remote Flush Annunciator
Backbox Installation
1.
To prepare the mounting site, pre-drill four (4), #10 screws using the dimensions shown in
Figure 2.5.3.1.1. Use four (4), #10 screws.
2.
Secure with two (2), #10 screws in the two-hole mounting pattern as shown in Locations 1 and
2 of Figure 2.5.3.1.1.
3.
Set the backbox over the top, two-hole mounting pattern, and hang the backbox over the two
screw heads.
4.
Insert and secure two (2), #10 screws in the two-hole mounting pattern as shown in Locations
3 and 4 of Figure 2.5.3.1.1.
Figure 2.5.3.1.1 E3-BB-FLUSH-LCD, CAB A2, Remote Flush Annunciator Backbox
Installation
NOTE: If the fasteners are anchored to wallboard, use #10 wall anchors. Mountings to concrete
walls should be backed by plywood to insulate the equipment from possible condensation.
BACKBOX
13 1/4"
9 27/32"
1"
1 45/64"
3"
1 13/64"
10"
7 1/2"
4"
11 1/4"
BACKBOX TOP
10
¾”
1 1/4
”
3 5/8
”
4 1/2
”
4 1/2"
1 45/64"
1
2
4
3
