E3 Series Installation/Operation Manual
—
P/N 9000-0574:I 11/04/10
83
Cabinets
Installation
2.5.10.2 E3 Cabinet D, Trim Rings Installation (Optional Accessory)
1.
Insert the Cabinet D, trim top ring over the top three-hole mounting pattern.
2.
Secure with three (3), #6 Hex Kep nuts in the three-hole mounting pattern on the top of the
backbox as shown in Locations 1, 2 and 3 of the figure below.
3.
Insert the Cabinet D, trim bottom ring on the bottom three-hole mounting pattern.
4.
Secure with three (3), #6 Hex Kep nuts in the three-hole mounting pattern on the bottom of the
backbox as shown in Locations 4, 5 and 6 of the figure below.
5.
Insert the Cabinet D, trim left ring on the left side of the five-hole mounting pattern.
6.
Secure with five (5), #6 Hex Kep nuts in the five-hole mounting pattern on the left side of the
backbox as shown in Locations 7, 8, 9, 10 and 11 of the figure below.
7.
Insert the Cabinet D, trim right ring on the right side of the five-hole mounting pattern.
8.
Secure with five (5), #6 Hex Kep nuts in the five-hole mounting pattern on the right side of the
backbox as shown in Locations 12, 13, 14, 15 and 16 of the figure below.
For information on flush-mounting, refer to the E3 Series Cabinet Trim Rings Installation
Instructions, P/N 9000-0058.
Figure 2.5.10.2.1 Cabinet D, Trim Ring Installation
NOTE: Use the Trim Ring Hardware Kit provided. The trim top/bottom and trim left/right rings are
interchangeable.
NOTE:
#6 HEX,
KEPS NUTS
(16 PLACES)
E3 Cabinet D,
Top Trim Ring
E3 Cabinet D,
Right Trim Ring
E3 Cabinet D,
Bottom Trim Ring
E3 Cabinet D,
Left Trim Ring
7
8
9
1
2
3
5
4
6
