E3 Series Installation/Operation Manual
—
P/N 9000-0574:I 11/04/10
87
Cabinets
Installation
2.5.10.5 Cabinet D, E3-INCC-D Plate Installation
1.
Mount the ILI-MB-E3/ILI95-MB-E3/ANX over the standoffs on the E3-INCC-D plate and
secure the eight (8), standoffs, (3/16
” hex,
#4-40 x 1
”) in the eight-hole mounting pattern as
shown in Location 1 of Figure 2.5.10.5.2.
2.
Mount the DACT-E3 and the RPT-E3 on top of the ILI-MB-E3/ILI95-MB-E3/ANX and secure
the eight (8), screws (#4-40 x 1/4
”) into the ei
ght (8), standoffs as shown in Location 2 of
Figure 2.5.10.5.2.
3.
Mount the PM-9/PM-9G on the E3-INCC-D plate and secure the eight (8), screws (#4-40 x
1/4
”) into the eight-hole mounting pattern, as shown in Location 3 of Figure 2.5.10.5.2.
4.
Mount the INI-VG on the E3-INCC-D plate and secure the six (6), screws (#4-40 x 1/4
”) into
the six-hole mounting pattern, as shown in Location 4 of Figure 2.5.10.5.2.
5.
Mount the first ILI-E3, ILI95-E3 Series or ANX sub-assembly on the E3-INCC-D plate and
secure the (8). screws (#4-40 x 1/4
”) into the
eight-hole mounting pattern as shown in Location
5 of Figure 2.5.10.5.2.
6.
Mount the second ILI-E3, ILI95-E3 Series or ANX sub-assembly on the E3-INCC-D plate and
secure the eight (8), screws (#4-40 x 1/4
”) in
to the eight-hole mounting pattern, as shown in
Location 6 of Figure 2.5.10.5.2.
7.
Mount the third ILI-E3, ILI95-E3 Series or ANX sub-assembly on top of the ILI-E3, ILI95-E3
Series or ANX and secure the eight (8), screws (#4-40 x
¼”) in
to the eight (8) standoffs as
shown in Location 7 of Figure 2.5.10.5.2.
8.
Mount the fourth ILI-E3, ILI95-E3 Series or ANX sub-assembly on top of the ILI-E3, ILI95-
E3 Series or ANX and secure the eight (8), screws (#4-40 x
¼”) into the eight (8) standoffs as
shown in Location 8 of Figure 2.5.10.5.2.
Figure 2.5.10.5.1 Cabinet D, E3-INCC-D Plate Installation
DA CT-E3
R PT-E3
INI-VG SE RIES
PM -9/P M -9G
ILI-E3, ILI95-E3
SER IES OR A NX
P M -9/PM -9G P C B
ILI-E3, ILI95-E3
SER IES OR A NX
ILI-E3, ILI95-E3
SER IES OR A NX
