24
E3 Series Installation/Operation Manual
—
P/N 9000-0574:I 11/04/10
Installation
Cabinets
2.5.1.4 Cabinet A1, Inner Door to the Backbox Installation
1.
Place the nylon spacer (#10) over the backbox bottom hinge pin as shown in Location 1 of the
figure below.
2.
Mount the inner door to the backbox by sliding the inner door, top hinge pin hole onto the
backbox top hinge pin as shown in Location 2.
3.
Align the inner door bottom hinge pin hole with the backbox bottom hinge pin.
4.
Slide the door over the inner door bottom hinge pin hole on top of the nylon spacer, and secure
using the #8 x .5
” screw as shown in Location 2 of the figure below.
5.
After the inner door is secured in place, attach the one end of the bonding wire to the top hinge
pin using the #8 x .5
” screw as shown in Location 3 of the figure below.
Figure 2.5.1.4.1 Cabinet A1, Inner Door to the Backbox Installation
NOTE: For information on the installation of the opposite end of the bonding wire, see Section
2.5.1.5 Step 2, Location 2 of Figure 2.5.1.5.1.
CABINET A1,
BACKBOX
BONDING
WIRE
CABINET A1,
INNER DOOR
BACKBOX
BOTTOM
HINGE PIN
INNER DOOR
BOTTOM
HINGE PIN HOLE
SCREW
#8 x .5"
SCREW
#8 x .5"
NY
LO
N
SP
AC
ER
# 1
0
3
2
1
BACKBOX TOP
HINGE PIN
INNER DOOR TOP
HINGE PIN HOLE
2
2
3
