Honeywell Gamewell-FCI E3 Series, Installation & Operation Manual

Page: 51 / 190

50 E3 Series Installation/Operation Manual
—
P/N 9000-0574:I 11/04/10
Installation Cabinets
2.5.6.5 Cabinet B, Inner Door to the Backbox Installation
1. Place the nylon spacer (5/8
” x .314ID x .312) over
the backbox, bottom hinge pin as shown in
Location 1 of the figure below.
2. Mount the inner door to the backbox by sliding the inner door top hinge pin hole onto the
backbox top hinge pin as shown in Location 2.
3. Align the inner door bottom hinge pin hole with the backbox bottom hinge pin.
4. Slide the inner door over the inner door bottom hinge pin hole on top of the nylon spacer, and
secure using the #8 x .5
” screw as shown in Location 2 of the figure below.
5. After the inner door is secured in place, attach one end of the bonding wire to the top hinge pin
using the #8 x .5
” screw as shown in Location 3 of the figure below.
NOTE: For information on the installation of the opposite end of the bonding wire, see Section
2.5.6.6, Step 3 and Location 3 of Figure 2.5.6.6.1.
Figure 2.5.6.5.1 Cabinet B, Inner Door to the Backbox Installation
CABINET B,
INNER DOOR
CABINET B,
BACKBOX
NY
LO
N
SP
AC
ER
5/8
"O
D
X
.31
4ID
X
.31
2


BONDING
WIRE
SCREW,
#8 x .5"
1
2
3
2
INNER DOOR TOP
HINGE PIN HOLE
BACKBOX TOP
HINGE PIN
INNER DOOR
BOTTOM
HINGE PIN HOLE
BACKBOX
BOTTOM
HINGE PIN
3
2