Honeywell FlexLine SmartServo 954, Service Manual

Page: 52 / 304

SERVICE TOOLS
44 Service Manual Part No.: 4417340 Revision 1
954 SmartServo FlexLine

On selection of an available entity, the [value edit] screen is
presented (see Figure 5-15 ).
o
If an
invalid
value is entered, the message “value out of
range” is displayed.
o
If the value is
not accepted
by the FlexConn module, the
message “value not accepted” is displayed.
o
You can scroll along the characters by push and hold
the up button.
o
An entity modification is only executed on simultaneously
pressing the left + right button. After this, first a range check
is performed. If the modification is accepted, you return to
the
[value edit] screen.
o
The cursor can be shifted to the right by pressing the right
button.
o
You can return to the
[entity list]
screen by pressing the left
button.
NOTE: Use the left button to return to the [entity list] screen without
executing the modification(s). Press the left + right button
simultaneously to undo this (these) modification(s)!
Figure 5-15 The entity list screen