Honeywell DHC, Service Manual

Page: 87 / 262

SDC / DHC Operation
EN2H-0221GE51 R0812 87
Para-
meter Designation Setting range / Setting values Factory
setting Setting
11 Automatic exit
time OFF No automatic exit 2
0,5 ...
5 min Automatic jump back to
the basic display occurs
after the set time
12 Anti-blocking
protection ON Anti-blocking protection
active ON
OFF Anti-blocking protection
not active
13 Logical fault
messages OFF, ON OFF
14 Automatic set
function OFF, ON OFF
15* Locking code
for heating tech-
nician OFF, 0001 to 9999 1234
16* Type code Controller type corresponding to
type code table Type
18 Cycle
temperature
enable OFF Cycle temperature
disabled ON
ON Cycle temperatures
enabled
19 Frost-protection
mode OFF Continuous frost
protection as per
parameter 05 OFF
0.5 to
60 min Cyclic operation