Honeywell DHC, Service Manual

Page: 86 / 262

Operation SDC / DHC
86 EN2H-0221GE51 R0812
Para-
meter Designation Setting range / Setting values Factory
setting Setting
NO Norwegian
DK Danish
Time
program Time program P1 Only one switching time
program enabled P1
P1 to
P3 Three switching time
programs enabled
Operating
mode Operating mode 1 Common adjustment for
all heating circuits 1
2 Separate adjustment for
the individual heating
circuits
Summer Summer switch-
off OFF, setting value of parameter
05 to 30°C 20
05 System frost
protection OFF, –20°C to Setting value of
summer parameter 3
06 Request contact
module
for variable
input 1 1 Direct heating circuit 1
2 Mixed heating circuit 1
3 Mixed heating circuit 2
4 Hot-water circuit
ALL All controllers
07 Request contact
module
for variable
input 2 For setting values, see parameter
06 1
08 Request contact
module
for variable
input 3 For setting values, see parameter
06 1
09 Climate zone –50 ... 0°C –12
10 Building type 1 Light construction 2
2 Medium construction
3 Heavy construction