Honda FG110, Manual

Page: 41 / 81

Date of Issue: February, 2005
5-6
© American Honda Motor Co., Inc.
FG110
3. FUEL TANK REMOVAL/INSTALLATION
Before removal, completely drain the fuel tank and fuel line.
Loosen the fuel tank cap and release the pressure from the
tank before operation.

WARNING
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
• Keep heat, sparks, and flame away when refueling.
• Handle fuel only outdoors.
• Wipe up spills immediately.
CUTAWAY VIEW OF A LOW-PERMEABILITY FUEL
TANK (See page 2-2 for serial number locations)
If a low-permeability fuel tank gets a
cut 1mm or more deep, exchange it.
OUTSIDE
WHITE
OFF-WHITE
WHITE
1 mm
87 ~ 93 mm
(3.4 ~ 3.7 in
FUEL TUBE
FUEL RETURN TUBE
MATING
SURFACES
100 ~ 106 mm
(3.9 ~ 4.2 in
FUEL TUBE
REASSEMBLY:
Inspect for cracks or
deterioration before installation
and replace if necessary.
Verify that the tube is not
kinked in the tank.
FUEL FILTER
CLEANING: (P. 3-9)
TUBE CLIP (2)
FUEL RETURN TUBE
FUEL TANK CAP
RECOIL STARTER ASSEMBLY
5 X 16 MM SOCKET BOLT (3)
FUEL TANK
Fuel capacity:
See Note 1
CLEANING: (P. 3-9)
REASSEMBLY:
Wash with solvent to remove any
sediment, and dry thoroughly
before starting
FUEL TUBE GROMMET
INSTALLATION:
Insert the fuel tube and fuel return
tube into the grommet to the
dimensions shown. Note that
engine failure can result if the
dimensions do not conform to the
specifications shown. Take care
not to damage the grommet
surface where it contacts the
tank. Replace the grommet if it is
damaged.
Note 1:
Fuel tank capacity (See
page 2-2 for serial number
locations):
Pre-2010 year:
0.55

(0.15 US gal, 0.12 Imp gal)
Low-perm horizontal type:
0.53

(0.14 US gal, 0.12 Imp gal)
Low-perm vertical type:
0.54

(0.14 US gal, 0.12 Imp gal)
Revised: October 2014
© American Honda Motor Co., Inc.
SERVICE BULLETIN #8 =>