Date of Issue: February, 2005
6-2
© American Honda Motor Co., Inc.
FG110
2. MUFFLER
a. REMOVAL
1. Remove the two 5 mm self-locking nuts.
2. Remove the 5 x 10 mm socket bolt from the air exhaust
guide.
3. Remove the muffler and air exhaust guide from the
engine.
4. Separate the muffler from the air exhaust guide.
b. INSTALLATION
1. Remove any carbon deposits from the muffler.
2. Use a plastic hammer to install the muffler and air exhaust
guide on the two studs.
Do not tap on the muffler seal flange or you will damage it.
If the seal flange is dented or damaged, replace the
muffler.
3. Install the two 5 mm self-locking nuts on the studs.
4. Install the 5 x 10 mm socket bolt through the air exhaust
guide.
5. Check the muffler exhaust port for damage.
CAUTION
The engine and muffler become very hot during
operation and they remain hot for a while after
operation. Be sure that the engine is cold before
muffler removal/installation.
5 mm SELF-
LOCKING NUT (2)
5 x 10 mm SOCKET BOLT
AIR
EXHAUST
GUIDE
MUFFLER
SEAL
FLANGE
Summary of Contents for FG110
Page 3: ...Date of Issue February 2005 American Honda Motor Co Inc...
Page 7: ...Date of Issue February 2005 1 4 American Honda Motor Co Inc FG110 NOTES...
Page 35: ...Date of Issue February 2005 4 6 American Honda Motor Co Inc FG110 NOTES...
Page 79: ...Date of Issue February 2005 11 4 American Honda Motor Co Inc FG110...
