Honda FG110, Manual

Page: 40 / 81

Date of Issue: February, 2005
© American Honda Motor Co., Inc.
5-5
FG110
2. STARTER PULLEY
a. DISASSEMBLY
1. Remove the engine top cover (P. 6-1) .
2. Remove the recoil starter (P. 5-1) .
3. Remove the ignition coil (P. 7-3) .
4. Remove the fan cover (P. 7-4) .
5. Remove the clutch assembly (P. 7-4) .
6. Hold the recoil starter pulley with a driver or equivalent tool
and loosen the flywheel with a 10 mm wrench.
b. REASSEMBLY
1. Hold the recoil starter pulley with a driver or equivalent tool
and tighten the flywheel to the specified torque.
TORQUE: 6.4 N•m (0.7 kg-m, 5.1 lb-ft)
2. Install the clutch assembly, fan cover, and ignition coil.
3. Adjust the ignition coil air gap (P. 7-3) .
4. Install the recoil starter and engine cover.
ENGINE ASSEMBLY
RECOIL
STARTER
PULLEY
DRIVER
10 mm WRENCH
DRIVER TORQUE WRENCH
(Commercially available)