Date of Issue: February, 2005
9-12
© American Honda Motor Co., Inc.
FG110
INSTALLATION
1. Install the new valve lifter [1] on the cylinder head and bring the
valve lifter in contact with the installation guide rib [2] of the
cylinder head.
Push the new rocker arm [3] into the shaft of the valve lifter by
hand while holding the valve lifter in the position and holding the
rocker arm against the installation guide rib [4] of the cylinder
head.
• Check the valve lifter for inlet side and exhaust side before
installation. Do not interchange them.
• Check the rocker arm for "IN" or "EX" marks before installation.
Do not interchange them.
2. Set the projection [1] of the valve lifter [2] in contact with the
installation guide rib [3] of the cylinder head.
Set the rocker arm [4] in contact with the installation guide rib [5]
of the cylinder head.
Check that the projection on the valve lifter and the rocker arm
are in contact with the installation guide rib of the cylinder head.
EXHAUST VALVE
ROCKER ARM
INTAKE VALVE
ROCKER ARM
INTAKE
VALVE LIFTER
EXHAUST
VALVE LIFTER
Viewed from the flywheel side:
Viewing cylinder head right down:
[1]
[2]
[3]
[4]
[1]
[4]
[5]
[2]
[3]
Revised: March, 2015
© American Honda Motor Co., Inc.
Summary of Contents for FG110
Page 3: ...Date of Issue February 2005 American Honda Motor Co Inc...
Page 7: ...Date of Issue February 2005 1 4 American Honda Motor Co Inc FG110 NOTES...
Page 35: ...Date of Issue February 2005 4 6 American Honda Motor Co Inc FG110 NOTES...
Page 79: ...Date of Issue February 2005 11 4 American Honda Motor Co Inc FG110...
