Date of Issue: February, 2005
© American Honda Motor Co., Inc.
5-3
FG110
c. REASSEMBLY
• Wear gloves and eye protection.
• During assembly, take care not to allow the return spring to
come out.
1. Insert the hook on the outer side of the spring into the
groove inside the starter reel.
2. Carefully wind the recoil starter spring inside the starter
reel.
3. Pass the starter rope through the starter reel and tie the
rope so that it can be untied easily by pulling it as shown.
4. Wind the starter rope around the recoil starter reel in the
direction of the arrow.
5. Install the starter reel on the starter case so that the spring
inner hook is hook to the case tab.
6. Hold the starter case and rotate the starter reel three turns
in the direction of the arrow for preliminary winding.
HOOK
RECOIL STARTER
SPRING
RECOIL STARTER
REEL
GROOVE
HOOK
RECOIL STARTER REEL
RECOIL STARTER ROPE
SLIPKNOT
RECOIL STARTER REEL
TAB
Summary of Contents for FG110
Page 3: ...Date of Issue February 2005 American Honda Motor Co Inc...
Page 7: ...Date of Issue February 2005 1 4 American Honda Motor Co Inc FG110 NOTES...
Page 35: ...Date of Issue February 2005 4 6 American Honda Motor Co Inc FG110 NOTES...
Page 79: ...Date of Issue February 2005 11 4 American Honda Motor Co Inc FG110...
