Date of Issue: February, 2005
© American Honda Motor Co., Inc.
3-9
FG110
11. FUEL SYSTEM CLEANING
1. Remove the fuel tank cap.
2. Tip the tiller as shown and empty the fuel tank into an
approved gasoline container. Use a funnel to avoid spilling
gasoline.
3. Pull the fuel filter out through the fuel filler neck by hooking
the black fuel supply tube with a piece of wire, such as a
partly straightened paper clip.
4. Inspect the fuel filter. If the fuel filter is dirty, wash it with
nonflammable solvent. Be careful to avoid damaging the
filter.
5. Replace the filter if it is damaged or excessively dirty.
6. Rinse sediment from the fuel tank with nonflammable
solvent.
7. Insert the fuel filter in the fuel tank, and install the fuel tank
cap.
WARNING
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling
fuel.
Keep heat, sparks, and flame away when refueling.
Handle fuel only outdoors.
Wipe up spills immediately.
FUEL FILTER
WIRE
FUEL SUPPLY
TUBE (BLACK)
FUEL FILTER
Summary of Contents for FG110
Page 3: ...Date of Issue February 2005 American Honda Motor Co Inc...
Page 7: ...Date of Issue February 2005 1 4 American Honda Motor Co Inc FG110 NOTES...
Page 35: ...Date of Issue February 2005 4 6 American Honda Motor Co Inc FG110 NOTES...
Page 79: ...Date of Issue February 2005 11 4 American Honda Motor Co Inc FG110...
