Date of Issue: February, 2005
© American Honda Motor Co., Inc.
7-3
FG110
c. AIR GAP ADJUSTMENT
Adjustment is required only when the ignition coil or the
flywheel has been removed.
1. Loosen the ignition coil’s two 4 x 14 mm hex bolts.
2. Rotate the flywheel to align the magnets with the ignition
coil.
3. Insert a feeler gauge between the ignition coil and the
magnets on the flywheel.
4. Push the ignition coil firmly toward the flywheel and tighten
the bolts.
5. Adjust the clearance at the magnetic part of the flywheel.
6. Adjust the gaps at both the right and left sides of the
ignition coil simultaneously so they are equal.
Clearance
0.3 ~ 0.5 mm (0.012 ~ 0.020 in)
FEELER GAUGE
MAGNETS
0.3 ~ 0.5 mm
(0.012 ~ 0.020 in)
0.3 ~ 0.5 mm
(0.012 ~ 0.020 in)
Summary of Contents for FG110
Page 3: ...Date of Issue February 2005 American Honda Motor Co Inc...
Page 7: ...Date of Issue February 2005 1 4 American Honda Motor Co Inc FG110 NOTES...
Page 35: ...Date of Issue February 2005 4 6 American Honda Motor Co Inc FG110 NOTES...
Page 79: ...Date of Issue February 2005 11 4 American Honda Motor Co Inc FG110...
