Hologic Faxitron CT, User Manual

Page: 51 / 79

FAXITRON CT USER MANUAL | HOLOGIC | REVISION 002
SECTION
Faxitron CT
Software
5
5-19
The bottom right image is a reconstructed 3D view of the specimen. The other 3 views show
the reconstructed specimen slices in each of the main axis.
The blue colored square shows that the view above is the slice of the specimen through the
blue line shown below.
When a slice view is selected a scroll bar will appear under the image. Moving this scroll bar
will adjust the position of the slice along an axis perpendicualr to the screen. This is indicated
by the corresponding line moving up and down in the other view.
In addition by selecting the line in the other view it can be dragged up or down to move the slice
position. This is the same for all 3 axis.
5.8.2
Slice Views
Figure 5.8.11
Faxitron CT Slice Views
Figure 5.8.12
Faxitron CT Slice Views