Hologic Faxitron CT, User Manual

Page: 18 / 79

FAXITRON CT USER MANUAL | HOLOGIC | REVISION 002
SECTION
Installation
and Setup
2
2-5
Environmental Conditions
Operational:
Temperature: 15.5 to 30 degrees C or 60 to 86 degrees F.
Relative humidity: < 75 percent.
Storage and transport:
Temperature: 0 to 45 degrees C or 32 to 113 degrees F.
Relative humidity: < 75 percent.
This equipment is designed for the following conditions:
•
Indoor use
•
Altitude up to 2000 meters
•
Pollution Degree 2
•
Over-voltage Category II
RADIATION SAFETY
• Radiation shielded cabinet.
• Compartment door equipped with dual safety interlocks.
• Radiation: Less than 0.1 mR/hr at 5 cm (2 in.) from exterior surface at maximum kV.
• Certified to comply with standards set by the US Food and Drug Administration, Center for
Devices and Radiological Health, (21 CFR-1020.40).
• Designed to comply with standards set forth by Underwriters Laboratories in the US and Canada.
X-RAY TUBE
Focal spot size < 15 um
kV 15-50kV
mA 1.0mA max
Power Isowatt limited to 11.5W max
Beryllium window thickness
0.010“ (254um)
X-ray beam divergence 40 deg. min.
Target Material Tungsten (W)
RADIOGRAPHIC MAGNIFICATION: Variable
EXPOSURE CONTROL: Automatic or Manual.
X-RAY DUTY CYCLE: 75%
POWER REQUIREMENTS: 100 - 240 VAC, 50/60 Hz, 200VA Max
Note: The system requires a dedicated 10A outlet.
MINIMUM PC SPECIFICATIONS
•
Full height PC with at least 2 PCIe card slots
•
3.0GHz or higher
•
At least 8GB of RAM computer memory
•
500Gb Hard Drive
•
Nvidia Graphics card with at least 2GB video memory
•
24 inch or better monitor with at min 1280x1024 resolution
•
6x USB Slots including 2x USB 3.0
•
2x Ethernet ports including one with 9000 bytes jumbo packet
•
Windows 10 OS based PC
•
Internet Browser
2.3.0
Faxitron CT
Specifications