Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
Vehicle Care
291
too severely damaged for the tyre
sealant and compressor kit to be
effective.
Read and follow all of the tyre
sealant and compressor kit
instructions.
The kit includes:
1. Sealant Canister Inlet Valve
2. Sealant/Air Hose
3. Base of Sealant Canister
4. Tyre Sealant Canister
5. On/Off Button
6. Slot on Top of Compressor
7. Pressure Deflation Button
8. Pressure Gauge
9. Power Plug
10. Air Only Hose
Tyre Sealant
Read and follow the safe handling
instructions on the label adhered to
the tyre sealant canister (4).
Check the tyre sealant expiration
date on the tyre sealant canister.
The tyre sealant canister (4) should
be replaced before its expiration
date. Replacement tyre sealant
canisters are available at your local
dealer.
There is only enough sealant to seal
one tyre. After usage, the tyre
sealant canister must be replaced.
Using the Tyre Sealant and
Compressor Kit to Temporarily
Seal and Inflate a
Punctured Tyre
When using the tyre sealant and
compressor kit during cold
temperatures, warm the kit in a
heated environment for five minutes.
This will help to inflate the tyre
faster.
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See
See
for
other important safety warnings.
Do not remove any objects that
have penetrated the tyre.
1. Remove the tyre sealant
canister (4) and compressor
from its storage location. See
Storing the Tyre Sealant and
Compressor Kit
2. Remove the air only hose (10)
and the power plug (9) from the
bottom of the compressor.